English

• 
  
• 1. [1]

     Su, Y.; Li, C.; Zhao, W.; Shi, Q.; Wang, H.; Jiang, Z.; Zhu, S. Modification of polyethersulfone ultrafiltration membranes with phosphorylcholine copolymer can remarkably improve the antifouling and permeation properties. J. Membr. Sci. 2008, 322, 171−177 doi: 10.1016/j.memsci.2008.05.047

  2. [2]

     Shi, Q.; Su, Y.; Zhao, W.; Li, C.; Hu, Y.; Jiang, Z.; Zhu, S. Zwit-terionic polyethersulfone ultrafiltration membrane with superior antifouling property. J. Membr. Sci. 2008, 319, 271−278 doi: 10.1016/j.memsci.2008.03.047

  3. [3]

     Jung, B. Preparation of hydrophilic polyacrylonitrile blend mem-branes for ultrafiltration. J. Membr. Sci. 2004, 229, 129−136 doi: 10.1016/j.memsci.2003.10.020

  4. [4]

     Castrillón, S. R. V.; Lu, X.; Shaffer, D. L.; Elimelech, M. Amine enrichment and poly(ethyleneglycol) (PEG) surface modifica-tion of thin-film composite forward osmosis membranes for organic fouling control. J. Membr. Sci. 2014, 450, 331−339 doi: 10.1016/j.memsci.2013.09.028

  5. [5]

     Liu, Y.; Zhang, S.; Wang, G. The preparation of antifouling ultrafiltration membrane by surface grafting zwitterionic polymer onto poly(arylene ether sulfone) containing hydroxyl groups membrane. Desalination 2013, 316, 127−136 doi: 10.1016/j.desal.2013.02.004

  6. [6]

     Tripathi, B. P.; Dubey, N. C.; Stamm, M. Polyethyleneglycol cross-linked sulfonated polyethersulfone based filtration membranes with improved antifouling tendency. J. Membr. Sci. 2014, 453, 263−274 doi: 10.1016/j.memsci.2013.11.007

  7. [7]

     Rana, D.; Matsuura, T. Surface modifications for antifouling membranes. Chem. Rev. 2010, 110, 2448−2471 doi: 10.1021/cr800208y

  8. [8]

     Zhu, X. Y.; Loo, H. E.; Bai, R. B. A novel membrane showing both hydrophilic and oleophobic surface properties and its non-fouling performances for potential water treatment applications. J. Membr. Sci. 2013, 436, 47−56 doi: 10.1016/j.memsci.2013.02.019

  9. [9]

     Fan, X.; Su, Y.; Zhao, X.; Li, Y.; Zhang, R.; Zhao, J.; Jiang, Z.; Zhu, J.; Ma, Y.; Liu, Y. Fabrication of polyvinylchloride ultra-filtration membranes with stable antifouling property by explo-ring the pore formation and surface modification capabilities of polyvinyl formal. J. Membr. Sci. 2014, 464, 100−109 doi: 10.1016/j.memsci.2014.04.005

  10. [10]

      Yang, Y. F.; Li, Y.; Li, Q. L.; Wan, L. S.; Xu, Z. K. Surface hydrophilization of microporous polypropylene membrane by grafting zwitterionic polymer for anti-biofouling. J. Membr. Sci. 2010, 362, 255−264

  11. [11]

      Chiang, Y.; Chan, Y.; Higuchi, A.; Chen, W.; Ruaan, R. Sulfobetaine-grafted poly(vinylidene fluoride) ultrafiltration membranes exhibit excellent antifouling property J. Membr. Sci. 2009, 339, 151−159 doi: 10.1016/j.memsci.2009.04.044

  12. [12]

      Liang, L.; Shi, M.; Viswanathan, V. V.; Peurrung, L. M.; Young, J. S. Temperature-sensitive polypropylene membranes prepared by plasma polymerization. J. Membr. Sci. 2000, 177, 97−108 doi: 10.1016/S0376-7388(00)00453-1

  13. [13]

      Fang, Y. Influence of degree of grafting and grafting temperature on the permeabilities of grafted polypropylene membranes. J. Appl. Polym. Sci. 1998, 68, 83−89 doi: 10.1002/(ISSN)1097-4628

  14. [14]

      Deng, B.; Yang, X.; Xie, L.; Li, J.; Hou, Z.; Yao, S.; Liang, G.; Sheng, K.; Huang, Q. Microfiltration membranes with pH dependent property prepared from poly(methacrylic acid) grafted polyethersulfone powder. J. Membr. Sci. 2009, 330, 363−368 doi: 10.1016/j.memsci.2009.01.010

  15. [15]

      Goddard, J. M.; Hotchkiss, J. H. Polymer surface modification for the attachment of bioactive compounds. Prog. Polym. Sci. 2007, 32, 698−725 doi: 10.1016/j.progpolymsci.2007.04.002

  16. [16]

      Meng, J. Q.; Yuan, T.; Kurth, C. J.; Shi, Q.; Zhang Y. F. Synthe-sis of antifouling nanoporous membranes having tunable nano-pores via click chemistry. J. Membr. Sci. 2012, 401, 109−117 doi: 10.1016/j.memsci.2012.01.049

  17. [17]

      Yuan, T.; Meng, J.; Hao, T.; Zhang, Y.; Xu, M. Polysulfone mem-branes clicked with poly(ethyleneglycol) of high density and uni-formity for oil/water emulsion purification: Effects of tethered hydrogel microstructure. J. Membr. Sci. 2014, 470, 112−124 doi: 10.1016/j.memsci.2014.07.013

  18. [18]

      Pan, Y.; Ma, L.; Lin, S.; Zhang, Y.; Cheng, B.; Meng, J. One-step bimodel grafting via a multicomponent reaction toward antifouling and antibacterial TFC RO membranes. J. Mater. Chem. A 2016, 4, 15945−15960 doi: 10.1039/C6TA05746B

  19. [19]

      Chinpa, W.; Quémener, D.; Bèche, E.; Jiraratananon, R.; Deratani, A. Preparation of poly(etherimide) based ultrafiltration membrane with low fouling property by surface modification with poly(ethylene glycol). J. Membr. Sci. 2010, 365, 89−97 doi: 10.1016/j.memsci.2010.08.040

  20. [20]

      Gassara, S.; Chinpa, W.; Quémener, D.; BenAmar, R.; Deratani, A. Pore size tailoring of poly(ether imide) membrane from UF to NF range by chemical post-treatment using aminated oligomers. J. Membr. Sci. 2013, 436, 36−46 doi: 10.1016/j.memsci.2013.02.005

  21. [21]

      Albrecht, W.; Seifert, B.; Weigel, T.; Schosssing, M.; Holländer, A.; Groth, T.; Hilke, R. Amination of poly(etherimide) membranes using di- and multivalent amines. Macromol. Chem. Phys. 2003, 204, 510−521 doi: 10.1002/(ISSN)1521-3935

  22. [22]

      Santoso, F.; Albrecht, W.; Schroeter, M.; Weigel, T.; Paul, D.; Schomäcker, R. A novel technique for preparation of aminated polyimide membranes with microfiltration characterization. J. Membr. Sci. 2003, 223, 171−185 doi: 10.1016/S0376-7388(03)00321-1

  23. [23]

      Trimpert, C.; Boese, G.; Albrecht, W.; Richau, K.; Weigel, T.; Lendlein, A.; Groth T. Poly(etherimide) membranes modified with poly(ethylene imine) as potential carrier for epidermal substitutes. Macromol. Biosci. 2003, 6, 274−284 doi: 10.1002/mabi.200500238

  24. [24]

      Albrecht, W.; Schauer, J.; Weigel, T.; Richau, K.; Groth, T.; Lendlein, A. Preparation of aminated microfiltration membranes by degradable functionalization using plain PEI membrane with various morphologies. J. Membr. Sci. 2007, 292, 145−157 doi: 10.1016/j.memsci.2007.01.027

  25. [25]

      Shaffer, D. L.; Jaramillo, H.; Castrillón, S. R. V.; Lu, X.; Elimelech, M. Post-fabrication modification of forward osmosis membranes with a poly(ethylene glycol) block copolymer for improved organic fouling resistance. J. Membr. Sci. 2015, 490, 209−219 doi: 10.1016/j.memsci.2015.04.060

  26. [26]

      Zhu, L. P.; Xu, L.; Zhu, B. K.; Feng, Y. X.; Xu, Y. Y. Preparation and characterization of improved fouling-resistant PPESK ultrafiltration membranes with amphiphilic PPESK-graft-PEG copolymers as additives. J. Membr. Sci. 2007, 294, 196−206 doi: 10.1016/j.memsci.2007.02.038

  27. [27]

      Kang, G.; Liu, M.; Lin, B.; Cao, Y.; Yuan, Q. A novel method of surface modification on thin-film composite reverse osmosis membrane by grafting poly(ethylene glycol). Polymer 2007, 48, 1165−1170 doi: 10.1016/j.polymer.2006.12.046

  28. [28]

      Fatimah, R.; Rasdi, M.; Phan, A. N.; Harvey, A. P. Rapid determination of reaction order and rate constants of an imine synthesis reaction using a mesoscale oscillatory baffled reactor. Chem. Eng. J. 2013, 222, 282−291 doi: 10.1016/j.cej.2013.02.080

  29. [29]

      Bourgoin, D.; Turgeon, S.; Ross, G. G. Characterization of hydrogenated amorphous carbon films produced by plasma-enhanced chemical vapour deposition with various chemical hybridizations. Thin Solid Films 1999, 357, 246−253 doi: 10.1016/S0040-6090(99)00536-2

  30. [30]

      Point, S.; Minea, T.; Besland, M. P.; Granier, A. Characteriza-tion of carbon nanotubes and carbon nitride nanofibres synthe-sized by PECVD. Eur. Phys. J. Appl. Phys. 2006, 34, 157−163 doi: 10.1051/epjap:2006051

  31. [31]

      Zeze, D. A.; North D. R.; Brown N. M. D.; Anderson C. A. Comparison of CxNy:H films obtained by deposition using magnetron sputtering or an inductively coupled plasma. Surf. Interface Anal. 2000, 29, 369−376 doi: 10.1002/1096-9918(200006)29:63.0.CO;2-D

  32. [32]

      Li, W.; Bian, C.; Fu, C.; Zhou, A.; Shi, C.; Zhang, J. A poly-(amide-co-ester) nanofiltration membrane using monomers of glucose and trimesoyl chloride. J. Membr. Sci. 2016, 504, 185−195 doi: 10.1016/j.memsci.2015.12.064

  33. [33]

      May, C. J.; Canavan, H. E.; Castner, D. G. Quantitative X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy characterization of the components in DNA. Anal. Chem. 2004, 76, 1114−1122 doi: 10.1021/ac034874q

  34. [34]

      Zhang, Y.; Su, Y.; Chen, W.; Peng, J.; Dong, Y.; Jiang, Z.; Liu, H. Appearance of poly(ethylene oxide) segments in the polyamide layer for antifouling nanofiltration membranes. J. Membr. Sci. 2011, 382, 300−307 doi: 10.1016/j.memsci.2011.08.021

  35. [35]

      Oikonomou, E. K.; Karpati, S.; Gassara, S.; Deratani, A.; Beaume, F.; Lorain, O.; Tencé-Girault, S.; Norvez, S. Localization of antifouling surface additives in the pore structure of hollow fiber PVDF membranes. J. Membr. Sci. 2017, 538, 77−85 doi: 10.1016/j.memsci.2017.05.046

  36. [36]

      Zou, L.; Vidalis, I.; Steele, D.; Michelmore, A.; Low, S. P.; Verberk, J. Q. J. C. Surface hydrophilic modification of RO membranes by plasma polymerization for low organic fouling. J. Membr. Sci. 2011, 369, 420−428 doi: 10.1016/j.memsci.2010.12.023

  37. [37]

      Yue, W. W.; Li, H, J.; Xiang ,T.; Qin, H.; Sun, S. D.; Zhao, C. S. Grafting of zwitterion from polysulfone membrane via surface-initiated ATRP with enhanced antifouling property and biocompatibility. J. Membr. Sci. 2013, 446, 79−91 doi: 10.1016/j.memsci.2013.06.029

  38. [38]

      Zhao, W.; Su, Y.; Li, C.; Shi, Q.; Ning, X.; Jiang, Z. Fabrication of antifouling polyethersulfone ultrafiltration membrane using Pluronic F127 as both surface modifier and pore-forming agent. J. Membr. Sci. 2008, 318, 405−412 doi: 10.1016/j.memsci.2008.03.013

•