Insight into Vulcanization Mechanism of Novel Binary Accelerators for Natural Rubber

Shu-yan Yang Zhi-xin Jia Lan Liu Wei-wen Fu De-min Jia Yuan-fang Luo

Citation:  Shu-yan Yang, Zhi-xin Jia, Lan Liu, Wei-wen Fu, De-min Jia, Yuan-fang Luo. Insight into Vulcanization Mechanism of Novel Binary Accelerators for Natural Rubber[J]. Chinese Journal of Polymer Science, 2014, 32(8): 1077-1085. doi: 10.1007/s10118-014-1486-x shu

Insight into Vulcanization Mechanism of Novel Binary Accelerators for Natural Rubber

  • 基金项目:

    This work was financially supported by the National Natural Science Foundation of China (Nos. 51003031 and 51303026) and Science Foundation for Universities and Institutions of Dongguan City (No. 2012108102008) and the Research Fund for the Doctoral Program of Dongguan University of Technology (No. ZJ121002).

摘要: A novel TU derivative, N-phenyl-N-(g-triethoxysilane)-propyl thiourea (STU), is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time of NR compounds with STU is the shortest, indicating a more nucleophilic reaction occurs. The Py-GC/MS results present that the phenyl iso-thiocyanate fragment still remains in the NR/STU compounds with or without extracting treatment, but no silane segment can be found in the vulcanizate with extracting treatment. Vibrations of C=S, NH and aromatic ring in FTIR experiments and a new methyne carbon peak, as well as the peaks of phenyl group of STU, in the solid state 13C-NMR experiments are found in the NR/STU vulcanizate with extracting treatment. Moreover, the crosslinking density of vulcanizates with STU evolves to lower level, indicating the sulfur atom of STU does not contribute to the sulfur crosslinking. Therefore, a new vulcanization kinetic mechanism of STU is propounded that the thiourea groups can graft to the rubber main chains as pendant groups by chemical bonds during the vulcanization process, which is in accordance with the experimental observations quite well.

English


    1. [1]

      Movahed, S.O., Ansarifar, A. and Song, M., Polym. Int., 2009, 58(2): 209

    2. [2]

      Yang, S.Y., Liu, L., Jia, Z.X., Jia, D.M. and Luo, Y.F., J. Rare Earth., 2011, 29(5): 444

    3. [3]

      Peng, H.L., Liu, L., Luo, Y.F., Hong, H.Q. and Jia, D.M., J. Appl. Polym. Sci., 2009, 112(4): 1967

    4. [4]

      Sui, G., Zhong, W.H., Yang, X.P. and Yu, Y.H., Mat. Sci. Eng. a-Struct., 2008, 485(1-2): 524

    5. [5]

      Yan, H.X., Sun, K., Zhang, Y., Zhang, Y.X. and Fan, Y.Z., J. Appl. Polym. Sci., 2004, 94(4): 1511

    6. [6]

      Versloot, P., Haasnoot, J.G. and Reedijk J., Rubber Chem. Technol., 1994, 67(4): 252

    7. [7]

      Choi, S.S., J. Appl. Polym. Sci., 2002, 83(12): 2609

    8. [8]

      Gonzlez, L., Rodrguez, A., Del, C.A. and Marcos-Fernndez, A., J. Appl. Polym. Sci., 2002, 85(3): 491

    9. [9]

      Susamma, A.P., Mini, V.T.E. and Kuriakose, A.P., J. Appl. Polym. Sci., 2001, 79(1): 1

    10. [10]

      Mathew, C., Mini, V.T.E., Kuriakose, A.P., Francis, D.J. and Amma, M.L.G., J. Appl. Polym. Sci., 1996, 59(2): 365

    11. [11]

      Susamma, A.P., Claramma, N.M., Nair, A.B. and Kuriakose, A.P., J. Appl. Polym. Sci., 2010, 115(4): 2310

    12. [12]

      Aprem, A.S., Joseph, K., Mathew, T., Altstaedt, V. and Thomas, S., Eur. Polym. J., 2003, 39(7): 1451

    13. [13]

      Kurien, M. and Kuriakose, A.P., Plast. Rubber Compos., 2001, 30(6): 263

    14. [14]

      Flory, P.J., J. Chem. Phys., 1950, 18(1): 108

    15. [15]

      Flory, P.J. and John, R.J., J. Chem. Phys., 1943, 11(11): 521

    16. [16]

      Yang, S.Y., Liu, L., Jia, Z.X., Jia, D.M. and Luo, Y.F., Acta Polymerica Sinica (in Chinese), 2011, (7): 709

    17. [17]

      Yang, S.Y., Liu, L., Jia, Z.X., Jia, D.M. and Luo, Y.F., Polymer, 2011, 52(12): 2701

    18. [18]

      Weng, G.S., Huang, G.S., Qu, L.L., Nie, Y.J. and Wu, J.R., J. Phys. Chem. B, 2010, 114(21): 7179

    19. [19]

      Cauzzi, D., Costa, M., Cucci, N., Graiff, C., Grandi, F. and Predieri, G., J. Organomet. Chem., 2000, 593-594: 431

    20. [20]

      Angelova, D., Armelao, L., Gross, S., Kickelbick, G., Seraglia, R. and Tondello, E., Appl. Surf. Sci., 2004, 226(1-3): 144

    21. [21]

      Angelova, D., Armelao, L., Barison, S., Fabrizio, M., Gross, S. and Sassi, A., Solid State Sci., 2004, 6(11): 1287

    22. [22]

      Ferrari, C., Predieri, G., Tiripicchio, A. and Costa, M., Chem. Mater., 1992, 4(2): 243

    23. [23]

      Wang, P.Y., Qin, H.L. and Yu, H.P., J. Appl. Polym. Sci., 2006, 101(1): 580

    24. [24]

      Angelova, D., Armelao, L., Barison, S., Fabrizio, M., Gross, S., Sassi, A., Seraglia, R.,Tondello, E., Trimmel, G. and Venzo, A., Solid State Sci., 2004, 6(11): 1287

    25. [25]

      Angelova, D., Armelao, L., Gross, S., Kickelbick, G., Seraglia, R., Tondello, E., Trimmel, G. and Venzo, A., Appl. Surf. Sci., 2004, 226(1-3): 144

    26. [26]

      Yin, H.D., Zhang, R.F. and Ma, C.L., Chinese J. Spectroscopy Laboratory, 1998, 15(5): 10

    27. [27]

      Juntuek, P., Ruksakulpiwat, C., Chumsamrong, P. and Ruksakulpiwat, Y., J. Appl. Polym. Sci., 2011, 122(5): 3152

    28. [28]

      Athikalam, P.S., Mary, K. and Arackal, P.K., Iran Polym. J., 2002, 11(5): 311

    29. [29]

      Kurien, M., Claramma, N.M. and Kuriakose, A.P., J. Appl. Polym. Sci., 2004, 93(6): 2781

    30. [30]

      Susamma, A.P., Kurien, M.A. and Kuriakose, P., Plast. Rubber Compos., 2004, 33 (2-3): 63

    31. [31]

      Marykutty, C.V., Mathew, G., Mathew, E.J. and Thomas, S., J. Appl. Polym. Sci., 2003, 90(12): 3173

  • 加载中
计量
  • PDF下载量:  0
  • 文章访问数:  979
  • HTML全文浏览量:  20
文章相关
  • 发布日期:  2014-08-05
  • 收稿日期:  2013-12-05
  • 修回日期:  2014-02-27
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

/

返回文章